JMatPro®
JMatPro® MPO
Add-on
The JMatPro® Material Property Optimiser (MPO) is a powerful optimisation tool for the design of multi-component alloys. It builds upon the calculation engine behind JMatPro® by combining it with a multi-objective optimisation method. It allows you to perform calculations aimed at identifying optimal values of decision variables that lead to desired material properties.
Full Details
Full Details
Capabilities of Material Property Optimiser
Design space: alloy composition and processing parameters
- Heat treatment temperature
- Austenitisation temperature for steels and cast irons
- Cooling rate
- Holding (or ageing) temperature
- Holding (or ageing) time
Objective space: thermodynamic, physical and mechanical properties derived from JMatPro® calculations along with alloy cost, average bond order and orbital energy level
- Phase amounts and boundaries
- Heat treatment window for Al, Mg, and Ni alloys
- Solidification range
- Hot cracking susceptibility
- Growth restriction factor
- Density and molar volume
- Average expansion coefficient
- Thermal conductivity
- Electrical conductivity and resistivity
- Young's, bulk, and shear moduli
- Poisson's ratio
- Single crystal stiffness coefficients
- Room-temperature yield stress, tensile stress and hardness for general steels, Al and Ni alloys
- Rupture stress and rupture life for Ni and NiFe based superalloys
- Custom properties defined as a function of temperature and alloy composition
Benefits of Material Property Optimiser
- Extensively validated JMatPro® calculations ensure reliable, robust, and consistent material property predictions
- Efficient exploration of design space allows you to identify trade-offs and focus on the most promising alloy compositions
- Intuitive and user-friendly interface ensure you can get results quickly
- Powerful tool to accelerate development of new or improved alloys, while reducing the need for costly experiments
Resources
How to use the JMatPro® MPO
Latest Software Releases
JMatPro® MPO version 2.1 released
VERSION 2.1 (November 2024)
- Fixed casting route calculations for stainless steels
- Added check to prevent running calculations for pure elements
- Updated terms and conditions
VERSION 2.0 (September 2024)
- Extended design space to include processing variables: heat treatment temperature, austenitisation temperature, cooling rate, and holding temperature/time
- Implemented calculation of mechanical properties for aluminium alloys, general steels, and Ni- and NiFe-based superalloys
- Added a casting route for the calculation of thermodynamic and physical properties
- Added new module "Cast Iron"
- Extended objective space to include many more properties: average expansion coefficient, solidification range, hot cracking susceptibility, growth restriction factor, room-temperature yield stress, tensile stress, and hardness, rupture stress/life, average bond order and orbital energy level
- Further extended objective space to include user-defined properties as a function of temperature and alloy composition
- Updated the thermodynamic and properties databases to match those included in JMatPro v14.0
- Fixed a minor bug preventing some popup components from working properly
MPO version 2.0 released
Version 2.0 (September 2024)
CHANGES
- Extended design space to include processing variables: heat treatment temperature, austenitisation temperature, cooling rate, and holding temperature/time
- Implemented calculation of mechanical properties for aluminium alloys, general steels, and Ni- and NiFe-based superalloys
- Added a casting route for the calculation of thermodynamic and physical properties
- Added new module "Cast Iron"
- Extended objective space to include many more properties: average expansion coefficient, solidification range, hot cracking susceptibility, growth restriction factor, room-temperature yield stress, tensile stress, and hardness, rupture stress/life, average bond order and orbital energy level
- Further extended objective space to include user-defined properties as a function of temperature and alloy composition
- Updated the thermodynamic and properties databases to match those included in JMatPro v14.0
- Fixed a minor bug preventing some popup components from working properly
You may also be interested in:
Add-On
JMatPro® API
Incorporate specific functionality of the JMatPro® software into your own applications.
API
Add-On
JMatPro® Material Property Optimiser (MPO)
A powerful optimisation tool for the design of multi-component alloys.
MPO